potPH Modular Growing Pot — ROUND 10 inch

External diameter: 10 in / 254.0 mm
Drainage base height: 1 inch / 25.4 mm
Stackable extender height: 1.5 inches / 38.1 mm
Insertion overlap: 6 mm; each extra extender adds 32.1 mm height
Wall thickness: 3.2 mm; total lateral connector clearance: 0.8 mm

PRINTING: print 1 base and as many extenders as needed.
Recommended upright orientation, 0.2 mm layers, 3-4 walls, PETG for reuse.
No supports should be necessary, though print a fit test first.
Drainage holes are in the BASE; add a saucer for indoor use.
Check stack stability before loading with wet growing medium.
Bambu P1S: 11 and 12 inch footprints exceed 256 mm bed; 10 inch is very close to its limit.

FILES: base STL, extender STL, editable OpenSCAD file, this CONTENT.txt, metadata.json.
