3D PRINTABLE MODEL / Modular growing pots

Round 7-inch modular growing pot.

7-inch round pot with a 1-inch drainage base and repeatable 1.5-inch stackable extenders. Print one base and add extenders to set the height.

INTERACTIVE 3D PREVIEW

See it from every angle.

Loading 3D preview…

Drag to rotate · Scroll to zoom
MODULAR GROWING POTS / BUILD YOUR HEIGHT

Start with a base.
Stack to grow.

Print one drainage base, then add as many matching extenders as your setup needs. Each extender overlaps the section below by 6 mm.

External diameter7 in177.8 mm
Drainage base1 in25.4 mm tall
Each extender1.5 in38.1 mm tall
Added height32.1 mmper extender after overlap

How to assemble

  1. Print one base and the number of extenders you want.
  2. Fit an extender onto the base, then stack additional extenders using the same joint.
  3. Check the fit and stability before filling with wet growing medium.
  4. Use a saucer indoors; drainage holes are in the base.

Wall thickness: 2.8 mm. Base plus one extender: 57.5 mm tall.

Print notes

  • print 1 base and as many extenders as needed.
  • Recommended upright orientation, 0.2 mm layers, 3-4 walls, PETG for reuse.
  • No supports should be necessary, though print a fit test first.
  • Drainage holes are in the BASE; add a saucer for indoor use.
  • Check stack stability before loading with wet growing medium.
  • Bambu P1S: 11 and 12 inch footprints exceed 256 mm bed; 10 inch is very close to its limit.

The supplied STL meshes passed watertight geometry checks. Physical fit, drainage, and stability still need testing with your printer and growing medium.